Introduction to the Principle of Four Kinds of Electric Sunshade of Lighting Roof
2024-07-22
Indoor lighting roof electric sunshade mainly has PTS electric sunshade, FCS electric sunshade, FSS electric sunshade, FTS electric sunshade four main products.
1. PTS electric sunshade:
[Principle Introduction] System Composition-The transmission part consists of three parts: transmission mechanism, fabric and control system: two motors, two tracks and connecting rods. The transmission mode in the track is belt transmission. The connecting rods are generally 40CM-60CM apart. The first connecting rod is fixed on the pulley of the track, and the rest is connected with cloth and can slide freely in the track. Fabric: Sunlight fabric is selected and designed to have a wave effect after the fabric is opened. Control system: select matching controller.
2. FCS electric sunshade is Fabric Circle System for short
[Principle introduction] FCS electric sunshade system is composed of three parts: transmission mechanism, fabric and controller. One end of the transmission part is the power end. The tubular motor is used to rotate to drive the winding tube and the rope winder fixed on the winding tube to rotate. So that a wire rope can be retracted. The other end of the transmission part is a fixed spring pulley, and the transmission wire rope is reversed through the pulley, so that the two ends of a wire rope can be fixed on the rope winder at the same time, and the wire rope is always in a tight state.
Two or more steel ropes are fixed and tightened above the fabric part (guide rails are used when the ceiling curtain crosses over). The fabric is installed from the top of the horizontal coupling rod, the spacing is equal (usually about 1M). A pulley is installed on the coupling rod, and the pulley rolls on the fixed steel wire. The fabric drawbar is connected with the transmission wire rope, and the fabric is unfolded and folded along the fixed wire rope under the drive of the winding tube (motor). Because the tension of the mechanism is small, the ordinary roller shutter fabric can be used.
3. FSS electric sunshade is Fabric Spring System for short
[Principle introduction] FSS electric sunshade system is composed of a spring and a tubular motor such as LT50 and RTS50 motors; one end of the fabric is attached to the coil tube equipped with a spring. The steel rope fixed at the other end of the fabric is wound on another reel equipped with a tubular motor winding tube, and the motor provides power. The spring provides rewinding elasticity, so as to ensure that the fabric maintains a tension state when it is running or stationary. After the ceiling is fully opened, the fabric will be rolled on the spring roller tube. The FSS system is a single-opening mode, and the fabric is slightly sagging when unfolded. The system uses a roller blind fabric with a certain tensile strength.
4. FTS electric sunshade is the abbreviation of Fabric Tension System in English
[Principle introduction] FTS electric sunshade system is composed of a drive mechanism, a fabric and a controller. The drive mechanism includes two FTS special tubular motors of the same model. The motor has an electronic brake inside, and the braking force can be externally connected. Special controller adjustment. Two tubular motors of the system are respectively installed in two winding tubes. One end of the fabric is fixed on one winding tube, and the cloth belt or steel rope fixing the other end of the fabric is wound on the reel of the other winding tube. The two motors work in coordination through a special controller. One motor provides the driving force for the fabric to run, and the brake of the other motor works at the same time, providing certain resistance to drag the fabric and avoiding the fabric falling down from the winding tube, when the canopy is fully opened, the fabric is rolled on one of the roll tubes. The FTS system can ensure that the ceiling curtain provides a certain tension to the fabric during operation or when it is stopped. The FTS system is in single-opening mode.
Contact Us
Email:
weiye123zheyang@163.com
Phone/WeChat:
+86 10-61427790/50
Address:
No.9 West, North Barracks Industrial Concentration Zone, Niulanshan Town, Shunyi District, Beijing, China
Beijing Welkin Tracery Sunshade Co, Ltd.
Contact number: +86 10-61427790/50
E-mail:weiye123zheyang@163.com
Fax: +86 10 61427750
Address: No.9 West, North Barracks Industrial Concentration Zone, Niulanshan Town, Shunyi District, Beijing, China
Zip Code: 101301
Public Account
Mobile Website
Beijing Welkin Tracery Sunshade Co, Ltd. | SEO Tags